Innovations :
|
Safety gate type X:
- Installation behind a sectional door.
- Easy manoeuvrability.
- Compensation for the gap between the edge of the platform and the back of the door.
- Robust construction.
|
Product advantages:
- Fixed access system on ISO containers.
- Clearance of the area for moving the ISO container via an overhead crane.
- No maintenance required.
|
Product advantages:
- Safe operation inside a safety cage.
- Easy to move thanks to the patented manoeuvring drawbar.
- Suitable for restricted manoeuvring areas.
|
|
The automatic flap door for shafts secures the handling of loads by means of a tackle
|
This way, the covered panels act as windbreak-systems and at the same time they retain falling pallets so that they cannot hurt any operator working in the area
|
Adjustable in height by means of a winch
|
| |
|
The two guardrails are connected by a transmission shaft
|
The automatic flap door for shafts secures the handling of loads by means of a tackle
|
|
Pallet handling is a risk that lots of operators are faced with on a daily basis
|
As pallets are used on a daily basis in warehouses, material handlers often don’t think about pallet handling safety
|
|
|
Examples of special MAGAPAL®
|
|
|
|
Product advantages :
- Fixed access system on tanker domes and ISO containers.
- Easy and safe access.
- Easy manoeuvrability.
- Customised safety cage.
|
Access onto the whole surface of a tanker requests important technical measures
|
Product advantages:
- Fixed access system on tank domes and ISO containers.
- Easy and safe access.
- Work area secured by a safty cage.
- Easy manoeuvrability.
|
|
Product advantages:
- Safe operation inside a safety cage.
- Easy to move thanks to the patented manoeuvring drawbar.
- The unfolded drawbar prevents access to the ladder.
|
Safety gate type TB0:
- Recommended for low ceiling constraints.
- Easy manoeuvrability.
- No overhang.
- Robust construction.
|
Safety gate type T:
- Recommended for low ceiling constraints.
- Easy manoeuvrability.
- No overhang.
- Robust construction.
|
|
Safety gate type PB4:
- Forming a door in the front of a building.
- Loads can be picked up from above.
- Reduced ground space.
- Easy manoeuvrability.
- Tailor-made.
|
Safety gate type P :
- Forming a door in the front of a building.
- Easy manoeuvrability.
- Tailor-made.
- Robust construction.
|
Safety gate type L:
- Handling by hoist or forklift.
- Height of loads not limited by the gate.
- Easy manoeuvrability.
- Tailor-made.
|
|
Product advantages :
- Clearance of the reception area.
- Avoidance of falling for small objects.
- Easy manoeuvrability.
- Reduced ground space.
- Robust construction.
|
|
|
